what is electric current

Electric Current

Definition: Electric current is defined as the rate of flow of negative charges of the conductor. In other words, the continuous flow of electrons in an electric circuit is called an electric current.The conducting material consists a large number of free electrons which move from one atom to the other at random.

Unit of Current :

Since the charge is measured in coulombs and time in seconds, so the unit of electric current is coulomb/Sec (C/s) or amperes (A). The amperes is the SI unit of the conductor. The I is the symbolic representation of the current.

Current Folw

Q= 1 Coulomb; t = 1 Second; then I = 1A

Thus, a wire is said to carry a current of one ampere when charge flows through it at the rate of one coulomb per second.

When an electrical potential difference is applied across the metallic wire, the loosely attached free electrons start moving towards the positive terminal of the cell shown in the figure below. This continuous flow of electrons constitutes the electrical current. The flow of currents i the wire is from the negative terminal of the cell to the positive terminal through the external circuit.

Conventional Direction of Flow of Current :

According to the electron theory, when the potential difference is applied across the conductor some matter flows through the circuit which constitutes the electric current. It was considered that this matter flows from higher potential to lower potential, i.e. positive terminal to the negative terminal of the cell through the external circuit.

Electron Flow

This convention of flow of current is so firmly established that it is still in use.Thus, the conventional direction of flow of current is from the positive terminal of the cell to the negative terminal of the cell through the external circuit. The magnitude of flow of current at any section of the conductor is the rate of flow of electrons i.e. charge flowing per second.

Mathematically, it is represented by

I = Q/t

On the basis of the flow of electric charge the current is mainly classified into two types, i.e. alternating current and direct current. In direct current, the charges flow through unidirectional whereas in alternating current the charges flows in both the direction.

Releted Post :

1. Difference between current & voltage
2. What is Electric Switches
3. Electronic Switches

Comments

MOSFET Symbol

MOSFET stands for Metal Oxide Silicon Field Effect Transistor or Metal Oxide Semiconductor Field Effect Transistor. This is also called as IGFET meaning Insulated Gate Field Effect Transistor. The FET is operated in both depletion and enhancement modes of operation. The following figure shows how a practical MOSFET looks like. Construction of a MOSFET The construction of a MOSFET is a bit similar to the FET. An oxide layer is deposited on the substrate to which the gate terminal is connected. This oxide layer acts as an insulator (sio 2 insulates from the substrate), and hence the MOSFET has another name as IGFET. In the construction of MOSFET , a lightly doped substrate, is diffused with a heavily doped region. Depending upon the substrate used, they are called as P-type and N-type MOSFETs . The following figure shows the construction of a MOSFET . The voltage at gate controls the operation of the MOSFET . In this case, both positive and n...

What is Electrical Switch

What is an Electrical Switch : An electrical switch is any device used to interrupt the flow of electrons in a circuit. Switches are essentially binary devices: they are either completely on (“closed”) or completely off (“open”). There are many different types of switches, and we will explore some of these types in this chapter. Learn the Different Types of Switches : Switches can be of mechanical or electronic type, Mechanical switches must be activated physically, by moving, pressing, releasing, or touching its contacts. Electronic switches do not require any physical contact in order to control a circuit. These are activated by semiconductor action. Mechanical Switches : Mechanical switches can be classified into different types based on several factors such as method of actuation (manual, limit and process switches), number of contacts (single contact and multi contact switches), number of poles and throws (SPST, DPDT, SPDT, etc.), operation and ...

Thyristors Working

Thyristor Tutorial In many ways the Silicon Controlled Rectifier, SCR or just Thyristor as it is more commonly known, is similar in construction to the transistor. It is a multi-layer semiconductor device, hence the “silicon” part of its name. It requires a gate signal to turn it “ON”, the “controlled” part of the name and once “ON” it behaves like a rectifying diode, the “rectifier” part of the name. In fact the circuit symbol for the thyristor suggests that this device acts like a controlled rectifying diode. Thyristor Symbol However, unlike the junction diode which is a two layer ( P-N ) semiconductor device, or the commonly used bipolar transistor which is a three layer ( P-N-P, or N-P-N ) switching device, the Thyristor is a four layer ( P-N-P-N ) semiconductor device that contains three PN junctions in series, and is represented by the symbol as shown. Like the diode, the Thyristor is a unidirectional device, that is it ...

Electronic Hub

Search This Blog